6 FET IRFB4110 Infineon Controller

From: $64.00

In stock
0 Reviews



In stock

Controller Battery Connections

Phase Wire Connections

Bar-Mounted Power Switch: For Infineon Controllers – optional

In stock

EB3 Infineon Program Lead: For Programming EB3 Infineon Controllers – optional

In stock

Categories: Motor Controllers
  • REVIEWS (0)

6 FET IRFB4110 Infineon Sensored Controller for 36V to 72V battery packs and motors with hall sensors.

Includes following functions as standard (we strongly recommend our matching Throttle are also purchased to make use of all functions and for plug and play simplicity:

  • Throttle connection with Integrated push button cruise, separate 3 speed connection (Full and Half Twist include integrated 3Sp and Cruise, Thumb Throttle is not integrated, but still includes all the same functionality with appropriate parts
  • Correctly Connected Cycle Analyst plug, with Shunt Value Marked on case for CA Shunt calibration
  • Programming header for simple programming flash via USB program cable (program cable is an optional extra)
  • E-brake with Motor kill and Regen
  • Jumper to select 36-60V or 72V operation
  • Remote low power ignition switch connection (bar mounted power switch available). Zero current drain when low power switch is powered off, so not necesary to disconnect when not in use, avoiding the sparks and damage that the uncontrolled current surge can cause

Fully programmable using the optional USB program cable. The following functions/parameters can be modified:

  • Battery and Phase current (inferred, not measured) can be independently adjusted
  • Low Voltage Cut
  • High Voltage Cut, or regen Voltage Limit
  • 3 programmable speed settings
  • Various Pedal Assist and Re-Gen braking paramters can be adjusted


  • 6pcs of Genuine IRFB4110 Mosfets. Just about the best 100V TO-220 Mosfet available
  • 100V Caps, Max input voltage is limited to 90V
  • 36-72V operation, 90V max (Jumper to select 60V plus)
  • 25A Current Limit
  • 2.5mm2 (Almost 13AWG) High Temperature Silicone wires used on Phase and Supply cables
  • Dimension: 125 * 65 * 35mm
  • Weight: 0.28kg

More info on the Infineon Controller connections can be found here.

Controller Battery Connections

Battery Connectors

4mm Gold Bullets (incl. battery side), Anderson 45PP (controller side), Anderson 45PP (incl. battery side), Bare Wire Please

Phase Wire Connections

Phase Wire Connectors

4mm Gold Bullets (incl. motor side), Anderson 45PP (controller only), Anderson 45PP (incl. motor connections), Bare Wire Please


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.