+
img

Upgrade Mac Kit with 47/50V Battery (~1500W Max)

From: $270.00

In stock
0 Reviews
SKU:

Throttle Type – optional

Ebrake Type – optional

Mac Motor & Axle Type

Mac Motor Wind

Rim Type – optional

Spoke Type

Controller Type – optional

PAS Controller/Display With Sensor – optional

Cycle Analyst Ebike Computer, CA-DPS Vers 2.4 – optional

In stock

CA3-DPS, Cycle Analyst Ebike Computer – optional

In stock

CA3 Cycle Analyst PAS Speed Sensor – optional

In stock

TDCM Torque Sensing BB For CA3 Cycle Analyst – optional

Cycle Analyst Mounting Bracket – optional

In stock

Cycle Analyst Programme Cable – optional

In stock

Torque Arm (Recommended, 2 can be fitted for extra security) – optional

Freewheel Type – optional

47V (13S4P) Preditor L Options – optional

58.8V 5A Aluminium Case Charger

54.6V Charger (for 13S, 47/48V NCM/NCA Battery) – optional

50V (14S5P) Rectangle Battery Pack Options – optional

50V (14S6P) Small Triangle Pack With Bag Options – optional

50V (14S7P) Rectangle Battery Pack Options – optional

50V (14S9P) Large Triangle Pack With Bag Options – optional

58.8V Charger (for 14S, 50V Battery) – optional

Grin Satiator Including Anderson Adaptor – optional

AC Plug for Charger – optional

  • DESCRIPTION
  • ADDITIONAL INFORMATION
  • REVIEWS (0)

The Front Wheel version of the Mac motor is quite tight to the fork on the non-disc side of the motor. Please refer to the drawings listed below to confirm the motor outline will match your fork.

Note: Battery-Fed Shipping MUST be used for shipments including a battery. Lead time for Batteries is ~2 weeks, prior to shipping (if the battery is not built, in stock). Battery-Fed shipping typically requires up to 2 weeks shipping time.

 

Our Mac Kit with 46.8V Frame Battery Pack includes:

  • Upgrade Mac motor (includes upgrade stator and temp sensor) in a built Alex wheel rim of your choice using 13G Sapim Spokes. See Upgrade Mac Kit for more information.
  • 25A 6fet 3077 Programmable Infineon Controller with matching throttle, 3 speed and Cruise, as well as a bar mounted power switch and a choice of ebrakes.
  • 50V Triangle Pack and 5A charger with a choice of Capacity Options.
  • Interconnections between the Motor, Controller, all Accessories and the Battery are plug and play.
  • The combined cost for the kit with battery is at a reduced rate compared to purchasing the items individually. Additional accessories such as suitable Freewheel, Disc Spacer, Torque Arm and Cycle Analyst are offered at reduced rates compared to purchasing separately.

The combination of controller, battery and motor have been selected to ensure all parts are suitably matched and working within the recommended limits. Instead of offering choices for motor windings, we have offered a range of typical cruising speeds that can be expected on the flat. We will try our best to provide a motor that will meet or exceed the requested speed.

Please note:

  • There is limited space for the Disc Brake Calliper when using the Mac Motor (15mm clearance only). This means that many better quality and/or Hydraulic Disc Callipers may foul the Motor. So we offer a 2.5mm thick disc spacer to enable more clearance. Another option is to convert to 203mm Disc. With a larger Disc installed, the Calliper can clear the hub and avoid these clearance issues. See: Mac 500W Rear Motor Outline and Mac 500W Front Motor Outline. Please ensure you understand this point and take measures to overcome any possible issues.
  • The Mac motor uses a screw on freewheel, it cannot use a cassette. The 11T DNP are popular as it allows you to pedal to a higher speed. The Mac can accept a 7 speed without any additional spacers (135mm axle width). If 8, 9 or 10 speed are used, a spacer of ~4mm is required and the axle width will increase to ~139mm (spacer will be provided). Difference between a Freewheel and a Cassette.
  • A Torque Arm is not absolutely essential at this power level, but they are recommended. We offer the full range of Genuine Grin Tech TAs (manufactured in Canada). Choose the appropriate TA according to your motor choice (Front/Rear) and the design of the Fork. See: Rear Rev4, Front Rev3 and Front Rev2 designs. A motor spinout on a front hub motor installation can be particularly unpleasant, so some will opt for dual front TAs. It is recommended only steel front forks are used for a Front Hub Motor installation. A suitably construted DIY Torque Arm is fine. We only recommend you consider this point and take suitable precautions to avoid a motor spinout.
  • The HWBS Ebrake Sensor allows you to retain your original cable type meachical brakes and brake levers. The HWBS sensor mounts inline with the brake cable and detects when the brake is pulled. HWBS sensor is not suitable for Hydraulic brakes. 1pc HWBS sensor is ordinarily supplied, it is not necessary to have a sensor on both front and rear brakes, 1 is enough in our opinion. Ebrakes are strongly recommended with this Kit as it has a Cruise Function.
  • When the Upgrade Mac kit is combined with the V3 Cycle Analyst, it opens up the possibility to have Motor Temperature Monitoring and Power Rollback if motor temperature exceeds a programmed limit. It also allows various control functions and PAS Assi

More info on the Mac motor here.

Ebrake Type

Ebrakes

1pc Generic Sensor (Hydraulic Brakes), Mechanical Ebrakes Lever (pair), 1pc HWBS Sensor (Mechanical Brakes)

Mac Motor & Axle Type

Motor Type/Axle

Fat Bike Rear, Freewheel, 170mm, Standard Front, 100mm, Standard Rear, Cassette, 135mm, Standard Rear, Freewheel, 135mm

Mac Motor Wind

Motor Option:

10T 40KPH (25 MPH) at 48V/26″ Rim, 12T 32KPH (20 MPH) at 48V/26″ Rim, 8T 50KPH (30 MPH) at 48V/26″ Rim

Rim Type

Rim Type

20″ Alex DM18 CNC, 20″ Alex DM24 CNC, 20″ Stars J57S (Black), 20″ Stars J57S (Red), 24″ Stars J57S (Black), 24″ Stars J57S (Red), 26″ Alex Blizzerk Pro 80, 26″ Alex DH19 CNC, 26″ Alex DH19 Disc, 26″ Alex DM24 CNC, 26″ Alex DM24 Disc, 26″ Alex DX32 Disc, 26″ Alex MD35 Disc, 26″ Stars J57S (Black), 26″ Stars J57S (Red), 650B Alex DH21 CNC, 650B Alex DH21 Disc, 650B Alex MD35 Disc, 700C Alex DH21 CNC, 700C Alex DH21 Disc, 700C Alex DM24 CNC, 700C Alex DM24 Disc, 700C Alex MD35 Disc

Spoke Type

Spoke Type

13G Sapim Black, 13G Sapim Silver, Without Wheel Build

Controller Type

Controller Type

6 fet 3077 (36-52V, 25A), 9 fet 3077 (36-52V, 30A)

PAS Controller/Display With Sensor

Weight .1 kg
Voltage

48V

TDCM Torque Sensing BB For CA3 Cycle Analyst

Weight .5 kg
TDCM BB Width

114mm, 120mm, 128mm

Torque Arm (Recommended, 2 can be fitted for extra security)

Weight 0.2 kg
Torque Arm (recommended)

Front Rev2, Front Rev3, Rear Rev4

Freewheel Type

Freewheel Type

10sp DNP (11T), 6sp Shimano, 7sp DNP (11T), 8sp DNP (11T), 9sp DNP (11T), Single Speed (16T)

47V (13S4P) Preditor L Options

47V (13S4P) Preditor L Battery Options

47V 11.8Ah High-Power (13S4P-30Q), 47V 9.8Ah High-Power (13S4P-25R)

54.6V Charger (for 13S, 47/48V NCM/NCA Battery)

54.6V Charger

54.6V 2A Plastic Case Charger, 54.6V 5A Charger (with 80/90/100% Switch)

50V (14S5P) Rectangle Battery Pack Options

14S5P Battery Option

50V 12.3Ah High-Power Pack (14S5P-25R), 50V 14.8Ah High-Power Pack (14S5P-30Q), 50V 15.5Ah High-Energy Pack (14S5P-33G), 50V 17.0Ah High-Energy Pack (14S5P-MJ1)

50V (14S6P) Small Triangle Pack With Bag Options

14S6P Battery Option

50V 14.7Ah High-Power Pack (14S6P-25R), 50V 17.7Ah High-Power Pack (14S6P-30Q), 50V 18.6Ah High-Energy Pack (14S6P-33G), 50V 20.4Ah High-Energy Pack (14S6P-MJ1)

50V (14S7P) Rectangle Battery Pack Options

50V Rectangle Battery Pack

50V 14.7Ah Standard Pack (14S7P-22P), 50V 21.7Ah High-Energy Pack (14S7P-33G), 50V 17.2Ah High-Power Pack (14S7P-25R), 50V 20.7Ah High-Power Pack (14S7P-30Q), 50V 23.8Ah High-Energy Pack (14S7P-MJ1)

50V (14S9P) Large Triangle Pack With Bag Options

14S9P Battery Option

50V 18.9Ah Standard Pack (14S9P-22P), 50V 22.05Ah High-Power Pack (14S9P-25R), 50V 26.55Ah High-Power Pack (14S9P-30Q), 50V 27.9Ah High-Energy Pack (14S9P-33G), 50V 30.6Ah High-Energy Pack (14S9P-MJ1)

58.8V Charger (for 14S, 50V Battery)

58.8V Charger

58.8V 2A Plastic Case Charger, 58.8V 5A Charger (with 90/100% Switch)

Grin Satiator Including Anderson Adaptor

Weight 1.5 kg
Satiator Program Cable

USB Program Cable Included, USB Program Cable Not Included

AC Plug for Charger

AC Plug Type

Australia/NZ, Europe, UK, USA