12/18 FET IRFB4110 EM3ev Controller (Black Case)

12/18 FET IRFB4110 EM3ev Controller (Black Case) is our Infineon Sensored Controller for 36V-72V battery packs and for motors with hall sensors. This is the same controller as our regular Infineon controller, but with a Black case and Water-Proof connectors.

Includes following functions as standard (uses the same Higo plugs on the throttle and ebrakes, as are used on the Bafang BBS Kits):

• Water-Proof E-Bus cables for all accessories (similar type to Bafang BBS Kits) included with every controller.
• Throttle and Ebrake uses the same Higo Connector as is used on the Bafang BBS Kits (optional extras).
• 3 speed switch (included as standard).
• Cruise Function(included as standard).
• Cycle Analyst plug, with Shunt Value Marked on case for CA Shunt calibration.
• Programming header (inside case to keep things tidy) for simple programming flash via USB program cable (program cable is an optional extra).
• Power switch on the case. Zero current drain when low power switch is powered off, so not necessary to disconnect when not in use, avoiding the sparks and damage that the uncontrolled current surge can cause

12/18 FET IRFB4110 EM3ev Controller (Black Case): Fully Programmable

Fully programmable using the optional USB program cable. The following functions/parameters can be modified:

• Battery and Phase current (inferred, not measured) can be independently adjusted
• Low Voltage Cut
• High Voltage Cut, or regen Voltage Limit
• 3 programmable speed settings
• Various Pedal Assist and Re-Gen braking parameters can be adjusted

12 Fet Black Case Specification:

• 12pcs of Genuine IRFB4110 Mosfets. 1 of the best 100V TO-220 Mosfet available
• 100V Caps, Max input voltage is limited to 90V
• 36-72V operation, 90V max
• 40A Current Limit
• 4mm² (>11AWG) High Temperature Silicone wires used on Phase and Supply cables
• Dimension: 180 * 85 * 45mm
• Weight: 0.54kg

18 fet Black Case Specification:

• 18pcs of Genuine IRFB4110 Mosfets. 1 of the best 100V TO-220 Mosfet available
• 100V Caps, Max input voltage is limited to 90V
• 36-72V operation, 90V max
• 60A Current Limit
• 4mm² (>11AWG) High Temperature Silicone wires used on Phase and Supply cables
• Dimension: 260 * 85 * 45mm
• Weight: 0.95kg